Zapi ACEX, Руководство пользователя

Страница: 81 / 81

AFCZP0BC – COMBIACX & ACEX - User Manual Page - 81/81
14 PERIODIC MAINTENANCE TO BE
REPEATED AT TIMES INDICATED
Check the wear and condition of the Contactors’ moving and fixed contacts.
Electrical Contacts should be checked every
3 months.
Check the Foot pedal or Tiller microswitch. Using a suitable test meter, confirm that
there is no electrical resistance between the contacts by measuring the volt drop
between the terminals. Switches should operate with a firm click sound.
Microswitches should be checked every
3 months.
Check the Battery cables, cables to the inverter, and cables to the motor. Ensure the
insulation is sound and the connections are tight.
Cables should be checked every
3 months.
Check the mechanical operation of the pedal or tiller. Are the return springs ok. Do
the potentiometers wind up to their full or programmed level.
Check every
3 months.
Check the mechanical operation of the Contactor(s). Moving contacts should be free
to move without restriction.
Check every
3 months.
Checks should be carried out by qualified personnel and any replacement parts
used should be original. Beware of NON ORIGINAL PARTS.
The installation of this electronic controller should be made according to the
diagrams included in this Manual. Any variations or special requirements should be
made after consulting a Zapi Agent. The supplier is not responsible for any problem
that arises from wiring methods that differ from information included in this Manual.
During periodic checks, if a technician finds any situation that could cause damage
or compromise safety, the matter should be bought to the attention of a Zapi Agent
immediately. The Agent will then take the decision regarding operational safety of
the machine.
Remember that Battery Powered Machines feel no pain.
NEVER USE A VEHICLE WITH A FAULTY ELECTRONIC CONTROLLER.
U
IMPORTANT NOTE ABOUT WASTE MANAGEMENT:
This controller has both mechanical parts and high-density electronic parts
(printed circuit boards and integrated circuits). If not properly handled during
waste processing, this material may become a relevant source of pollution.
The disposal and recycling of this controller has to follow the local laws for
these types of waste materials.
Zapi commits itself to update its technology in order to reduce the presence of
polluting substances in its product.