Zapi ACEX, Руководство пользователя

Страница: 63 / 81

AFCZP0BC – COMBIACX & ACEX - User Manual Page - 63/81
Smart driver KO - MDI
CAN 68 Smart driver is open, not able to
provide EB positive valve, pump, traction stopped,
Lc opened
start-up Key re-cycle
Key-off shorted - MDI CAN
76
Key-off signal is low at Key-on
valve, pump, traction stopped,
Lc opened
start-up Key re-cycle
Evp driv. short - MDI CAN
50 Evp driver is failed shorted (always
ON) mismatch between the valve
set-point and its feedback valve, pump, traction stopped,
Lc opened, Eb applied start-up, stby valve or pump or
traction request
Pump Vmn Low - MDI
CAN 28 Pump motor output is too low, with
respect to pwm applied valve, pump, traction stopped,
Lc opened, Eb applied start-up, stby,
during pump
function valve or pump or
traction request
Pump Vmn High - MDI
CAN 29 Pump motor output is too high,
with respect to pwm applied valve, pump, traction stopped,
Lc opened, Eb applied during pump
function valve or pump or
traction request
Wrong Zero - MDI CAN
code alarm 53 The outputs of the amplifiers (used
to measure the motor voltage) are
cheked this alarm occurs when
voltage signals >3V or <2V at the
init valve, pump, traction stopped,
Lc opened, Eb applied init valve or pump or
traction request
Evp coil
open - MDI CAN 50 The Evp1 coil is not connected
between PAUX and EVP output,
and the parameter EVP TYPE in
the set-option menu is set Analog
or Digital valve, pump, traction stopped,
Lc opened, Eb applied start-up, stby,
traction valve or pump or
traction request
Aux Batt. Short - MDI CAN
code alarm 74 When the positive of the AUX
OUTPUT is driven by the tiller, the
positive is high and the tiller is
released. valve, pump, traction stopped,
Lc opened, Eb applied start-up, stby
Pev not OK - MDI CAN
code alarm 98 The PEV connector (B2) is not
connected to the battery or the
voltage is different. valve stopped, (eventually)
pump stopped, (eventually)
traction stopped, (eventually)
Lc opened and MC applied continuous
Controller Mism - MDI
CAN 12 The software is not compatible with
the controller. valve, pump, traction stopped,
Lc opened, Eb applied start-up key-recycle
Init vmn low - MDI CAN 72
Motor output voltage lower than
expected, before driving the bridge.
valve, pump, traction stopped,
Lc opened, Eb applied start-up key-recycle
Init vmn high -
MDI CAN 31 Motor output voltage higher than
expected, before driving the bridge.
valve, pump, traction stopped,
Lc opened, Eb applied start-up key-recycle
Pump vmn not ok -
MDI CAN 32 Pump motor output voltage is
different than expected
valve, pump, traction stopped,
Lc opened, Eb applied start-up key-recycle