Zapi ACEX, Руководство пользователя

Страница: 39 / 81

AFCZP0BC – COMBIACX & ACEX - User Manual Page - 39/81
diagnosis “EV3 DRIVER SHORTED” relative to the load connected to CNA#2 is
activated. When set = ABSENT the diagnosis is not implemented and the EV3
output is NOT driven.
14) HORN
PRESENT/ABSENT: If set PRESENT, the HORN output is driven. When set
ABSENT the HORN output is NOT driven.
15) HYDRO FUNCTION
KEY ON/RUNNING/NONE: Defines the activation of hydraulic steering fuction.
-
KEY ON: the function is activated at key-on.
- RNNING: the function is activated during a traction or braking request.
- NONE: the function is never activated.
16) M.C. FUNCTION
PRESENT/ABSENT: When is set PRESENT the Main Contactor is closed after
the controller key-on if the initial diagnosis pass. If is set ABSENT the diagnosis
are masked and M.C. is not closed after controller Key-on.
17) AUX OUT FUNCTION
PRESENT/ABSENT: When is set PRESENT the Electro mechanic Brake is
driven after a traction request if all the related diagnosis pass. If is set ABSENT
the diagnosis are masked and E.B. is not closed after a traction request.
18) PROPORTION. PUMP
ON/OFF: When is set ON the lift functions are proportional. The pump motor
speed increase if the analog value of CPOTL increase. If is set ABSENT the
analog value CPOTL is not read and the speed of pump motor is set maximum
when the digital input is closed (LIFT).
10.4.2 Config menu “ADJUSTMENTS” functions list
To enter the CONFIG MENU it is necessary to push in the same time the right side
top and left side top buttons. Then roll until the ADJUSTMENTS item appears on the
hand set display. Push the ENTER button.
1) Opening Zapi Menu
ADXT2B ZP1.00
24V 165A 00000
2) Press Top Left & Right Buttons to enter
CONFIG MENU
% ' %
' ' '
3) The Display will show: SET MODEL
CONFIG MENU
SET MODEL
4) Press ROLL UP button until ADJUSTMENTS
MENU appears
% ' '
' ' '
5) ADJUSTMENTS appears on the display
CONFIG MENU
ADJUSTMENTS
6) Press ENTER to go into the ADJUSTMENTS
MENU
' % '
' ' '