background image

Old hose sets must not be reused.

If the mains power supply cable is damaged, it must be

replaced by the manufacturer, its Authorised Service Centre or

similarly qualified persons to avoid an electrical hazard.

Before any maintenance operation, deactivate the appliance

and disconnect the mains plug from the socket.

Do not use high pressure water sprays and/or steam to clean

the appliance.

Clean the appliance with a moist cloth. Use only neutral

detergents. Do not use abrasive products, abrasive cleaning

pads, solvents or metal objects.

SAFETY INSTRUCTIONS

INSTALLATION
• Remove all the packaging and the transit bolts.

• Keep the transit bolts in a safe place. If the

appliance is to be moved in future they must be

reattached to lock the drum to prevent internal

damage.

• Always take care when moving the appliance as

it is heavy. Always use safety gloves and

enclosed footwear.

• Do not install or use a damaged appliance.

• Follow the installation instruction supplied with

the appliance.

• Do not install or use the appliance where the

temperature can be less than 0°C or where it is

exposed to the weather.

• The floor area where the appliance is to be

installed must be flat, stable, heat resistant and

clean.

• Make sure that there is air circulation between

the appliance and the floor.

• Do not install the appliance directly over the

floor drain.

• Adjust the feet to have the necessary space

between the appliance and the flooring.

• Do not install the appliance where the appliance

lid cannot be fully opened.

• Do not put a container to collect possible water

leakage under the appliance. Contact the

Authorised Service Centre to ensure which

accessories can be used.

ELECTRICAL CONNECTION
• The appliance must be earthed.

• Always use a correctly installed shockproof

socket.

• Make sure that the parameters on the rating

plate are compatible with the electrical ratings

of the mains power supply.

• Do not use multi-plug adapters and extension

cables.

• Make sure not to cause damage to the mains

plug and to the mains cable. Should the mains

cable need to be replaced, this must be carried

out by our Authorised Service Centre.

• Connect the mains plug to the mains socket

only at the end of the installation. Make sure that

there is access to the mains plug after the

installation.

• Do not touch the mains cable or the mains plug

with wet hands.

• Do not pull the mains cable to disconnect the

appliance. Always pull the mains plug.

• This appliance complies with the E.E.C.

Directives.

WATER CONNECTION
• Do not cause damage to the water hoses.

• Before connection to new pipes, pipes not used

for a long time, where repair work has been

carried out or new devices fitted (water meters,

etc.), let the water flow until it is clean and clear.

• Ensure that there are no visible water leaks

during and after the first use of the appliance.

• Do not use an extension hose if the inlet hose is

too short. Contact the service centre for the

replacement of the inlet hose.

• You can extend the drain hose to maximum 400

cm. Contact the service centre for the other

drain hose and the extension.

3

Содержание ZWY 61024WI





















Отзывы: