For cakes and biscuits.
• Deep roasting pan
To bake and roast or as pan to collect fat.
Before first use
Warning! Refer to "Safety information" chapter.
Initial Cleaning
• Remove all parts from the appliance.
• Clean the appliance before first use.
Caution! Do not use abrasive cleaning agents! This
can damage the surface. Refer to chapter "Care and
Cleaning".
Pre-heating
1. Set function and maximum temperature.
2. Let the appliance operate without the food for approx-
imately 1 hour.
3. Set function and maximum temperature.
4. Let the appliance operate without the food for approx-
imately 10 minutes.
5. Set function and maximum temperature.
6. Let the appliance operate without the food for approx-
imately 10 minutes.
This is to burn off the residue in the appliance. The acces-
sories can become more hot than usually. When you pre-
heat the appliance for the first time, the appliance can
make an odour and smoke. This is the usual effect. Make
sure the airflow is sufficient.
Daily use
Warning! Refer to "Safety information" chapter.
Activating and deactivating the appliance
1. Turn the knob for the oven functions to an oven func-
tion.
2. Turn the knob for the temperature to a temperature.
The power indicator comes on while the appliance
operates.
The temperature indicator comes on while the tem-
perature in the appliance increases.
3. To deactivate the appliance, turn the knob for the
oven functions and the knob for the temperature to
the Off position.
Cooking zones
With the control knobs for cooking zones you oper-
ate the hob that you installed with the oven. For
more information about the hob, refer to the hob user
manual.
Heat settings
Control knob
Function
0
Off position
Control knob
Function
1-9
Heat settings
(1 = lowest heat setting; 9= high-
est heat setting)
1. Turn the control knob to a necessary heat setting.
2. To complete the cooking process, turn the control
knob to the “0” position.
Use of the double zone (if applicable)
Warning! To set double zone on turn the control
knob with the double zone to the right (do not turn it
through the stop position).
1. Turn the control knob to the right - to position "9".
2. Turn the control knob slowly to symbol until you
can hear a click.
At this time the two cooking zones are on.
3. To set necessary heat setting refer to "Heat settings".
19
Содержание ZOU364
Страница 57: ...57 ...
Страница 58: ...58 ...
Страница 59: ...59 ...
Страница 60: ...www zanussi com shop 397165501 B 352010 ...