Zanussi ZOU364, Руководство пользователя

Страница: 26 / 60

Clean the glass panel with water and soap. Dry the glass
panel carefully.
Installing the door and the glass panel
When you install the panel with a decorative frame, make
sure that the screen-printing zone looks to the inner side
of the door. Make sure that after the installation the sur-
face of the glass panel frame on the screen-printing zones
is not rough when you touch it.
Make sure that you install the internal panel of glass in the
seats correctly (refer to the illustration).
What to do if…
Warning! Refer to "Safety information" chapter.
Problem Possible cause Remedy
The cooking zones do not
operate.
Refer to the user manual for the hob.
The appliance does not heat
up.
The appliance is deactivated. Activate the appliance. Refer to "Daily use".
The fuse in the fuse box is re-
leased.
Do a check of the fuse. If the fuse is released
more than one time, contact a qualified electri-
cian.
The oven lamp does not op-
erate.
The oven lamp is defective. Replace the oven lamp.
Steam and condensation set-
tle on the food and in the ap-
pliance.
You left the dish in the appliance
for too long.
Do not let the dishes to stay in the appliance for
more than 15-20 minutes after the cooking ends.
If you cannot find a solution to the problem yourself, con-
tact your dealer or the service centre.
The necessary data for the service centre is on the rating
plate. The rating plate is on the front frame of the oven
cavity.
We recommend that you write the data here:
Model (MOD.)
.........................................
Product number (PNC) .........................................
Serial number (S.N.) .........................................
Installation
Warning! Refer to "Safety information" chapter.
Building Under
Warning! Only a qualified and competent person
must do the installation of the appliance. If you do
26