Zanussi ZOP37987XU, Руководство пользователя

Страница: 27 / 36

You can use the END function to delay the start of
the cleaning.
During the pyrolysis the oven lamp is off.
5. When the oven is at the set temperature, the
door locks. The display shows and the bars
of the heat indicator until the door unlocks.
To stop pyrolysis before it is completed, turn
the knob for the oven functions to the off
position.
6. When pyrolysis is completed, the display
shows the time of day. The oven door stays
locked.
7. When the oven is cool again, the door unlocks.
CLEANING REMINDER
To remind you that the pyrolysis is necessary, PYR
flashes in the display for 10 seconds after each
activation and deactivation of the oven.
The cleaning reminder goes out:
• after the end of the pyrolysis.
• if you press and at the same
time while PYR flashes in the
display.
REMOVING AND INSTALLING DOOR
The oven door has three glass panels. You can
remove the oven door and the internal glass panels
to clean them. Read the whole "Removing and
installing door" instruction before you remove the
glass panels.
The oven door may close if you try to
remove the glass panels before you
remove the oven door.
CAUTION! Do not use the oven
without the glass panels.
1. Open the door fully and hold both hinges.
2. Lift and turn the levers fully on both hinges.
3. Close the oven door halfway to the first
opening position. Then lift and pull forward and
remove the door from its seat.
4. Put the door on a soft cloth on a stable surface.
27