Zanussi ZOP37987XU, Руководство пользователя

Страница: 12 / 36

At the set END time the signal sounds for 2
minutes.
and time setting flash in the display.
The oven turns off.
5. Press any button or open the oven door to stop
the signal.
6. Turn the knobs to the off position.
SETTING THE MINUTE MINDER
Minute minder can be both set when the oven is
turned on and off.
1. Press again and again until starts to
flash.
2. Press or to set the seconds and than
the minutes.
When the time you set is longer than 60
minutes,
flash in the display.
3. Set the hours.
4. The MINUTE MINDER starts automatically after
5 seconds.
After 90% of the set time the signal sounds.
5. When the set time ends the signal sounds for 2
minutes. "00:00" and flash in the display.
Press any button to stop the signal.
COUNT UP TIMER
To reset the Count Up Timer, press and hold
and . The timer starts to count up again.
USING THE ACCESSORIES
WARNING! Refer to Safety chapters.
USING THE CORE TEMPERATURE SENSOR
The core temperature sensor measures the core
temperature of the meat. When the meat is at the
set temperature, the oven turns off.
There are two temperatures to be set:
• The oven temperature. Refer to the table for
roasting.
• The core temperature. Refer to the table for the
core temperature sensor.
CAUTION! Only use the core
temperature sensor supplied with the
oven, or genuine replacement parts.
1. Set the oven function and the oven
temperature.
2. Put the point of the core temperature sensor
(with the symbol on the handle) into the
centre of the meat.
3. Put the plug of the core temperature sensor
into the socket on the top of the cavity.
Make sure that the core temperature sensor
stays in the meat and in the socket during the
cooking.
When you use the core temperature sensor for
the first time, the default core temperature is 60
°C. While
flashes, you can use the knob
for the temperature to change the default core
temperature.
The display shows the symbol of the core
temperature sensor and the default core
temperature.
4. Press to save the new core temperature, or
wait 10 seconds for the setting to be saved
automatically.
The new default core temperature is displayed
during the next use of the core temperature sensor.
When the meat is at the set core temperature, the
symbol for the core temperature sensor
and
the default core temperature flash. The signal
sounds for 2 minutes.
5. Press any button or open the oven door to stop
the signal.
12