Zanussi ZDT 13011, Руководство пользователя

Страница: 26 / 56

Problem Possible cause Possible solution
Incorrect position of the items in the
baskets. Water could not wash all
items. Make sure that the position of the
items in the baskets is correct and that
the water can easily wash all items.
The spray arms could not turn freely. Make sure that the position of the
items in the baskets is correct and
does not cause the blockage of the
spray arms.
The quantity of detergent was not
sufficient. Make sure that you add the correct
quantity of detergent in the dispenser
before you start a programme.
There was no detergent in the deter-
gent dispenser. Make sure that you add detergent in
the dispenser before you start a pro-
gramme.
Limescale particles on the
dishes. The salt container is empty. Make sure that there is dishwasher salt
in the salt container.
The set level of the water softener is
incorrect. Make sure that the set level of the wa-
ter softener agrees with the water
hardness in your area.
The cap of the salt container is loose. Tighten the cap.
Whitish streaks and stains
or bluish layers on glasses
and dishes. The released quantity of rinse aid is
too much. Decrease the released quantity of
rinse aid .
The quantity of detergent was too
much. Make sure that you add the correct
quantity of detergent in the dispenser
before you start a programme.
Dry water drop stains on
glasses and dishes. The released quantity of rinse aid
was not sufficient . Increase the released quantity of rinse
aid.
The quality of the detergent can be
the cause. Try a different brand of detergent.
The dishes are wet. The programme had no drying phase. Set a programme with the drying
phase.
The dishes are wet and
matt. The rinse aid dispenser is empty. Make sure that there is rinse aid in the
rinse aid dispenser.
The quality of the rinse aid can be the
cause. Try a different brand of rinse aid.
Technical information
Dimensions Width / Height / Depth (mm) 596 / 818 - 898 / 550
Electrical connection Refer to the rating plate.
Voltage 220-240 V
Frequency 50 Hz
Water supply pressure Min. / max. (bar / MPa) (0.5 / 0.05 ) / (8 / 0.8 )
26
www.zanussi.com