3
To remove filters (
B
)
and (
C
), turn the han-
dle counterclockwise
and remove. Pull
apart filter (
B
) and
(
C
). Wash the filters
with water.
A
4
Remove filter (
A
).
Wash the filter with
water.
D
A
5
Put filter (
A
) to its ini-
tial position. Make
sure that it assembles
correctly under the
two guides (
D
).
6
Assemble filters (
B
)
and (
C
). Put them in-
to position in filter
(
A
). Turn the handle
clockwise until it
locks.
An incorrect position of the filters can
cause bad washing results and damage to
the appliance.
Cleaning the spray arms
Do not remove the spray arms.
If the holes in the spray arms are clogged, re-
move remaining parts of soil with a thin pointed
object.
External cleaning
Clean the appliance with a moist soft cloth.
Only use neutral detergents. Do not use abra-
sive products, abrasive cleaning pads or sol-
vents.
Troubleshooting
The appliance does not start or it stops during
operation.
First try to find a solution to the problem (refer
to the table). If not, contact the Service.
With some problems, some indicators
flash continuously and/or intermittently
at the same time to show an alarm code.
Alarm code
Problem
• The indicator of the set programme flashes contin-
uously.
• The end indicator flashes 1 time intermittently.
The appliance does not fill with water.
• The indicator of the set programme flashes contin-
uously.
• The end indicator flashes 2 times intermittently.
The appliance does not drain the water.
24
www.zanussi.com
Содержание ZDT 13011
Страница 56: ...www zanussi com shop 117926151 A 042012 ...
