Problem
Possible cause
Remedy
The display shows or
, the appliance does not
heat up and there is no air
circulation.
Demo mode is on.
Deactivate the appliance. Press for
approximately 2 seconds. An acoustic
signal sounds. Press and hold the but-
tons and at the same time until
the acoustic signal sounds and the in-
dicator goes out.
The display shows the error
code "F...".
There is an electronic error.
Write down the error code and contact
the Service Centre.
If you cannot find a solution to the problem yourself,
contact your dealer or the service centre.
The necessary data for the service centre is on the rat-
ing plate. The rating plate is on the front frame of the
oven cavity.
We recommend that you write the data here:
Model (MOD.)
.........................................
Product number (PNC)
.........................................
Serial number (S.N.)
.........................................
Installation
Warning!
Refer to "Safety information" chapter.
Building In
594
2
20
570
590
540
560
50
550min
587
560-570
550 min
600
560-570
80÷100
A
B
Electrical installation
Warning!
Only a qualified and competent person
must do the electrical installation.
The manufacturer is not responsible if you do not
follow safety precautions from chapter "Safety in-
formation".
This appliance is supplied with a main plug and a main
cable.
The cable
Cable types applicable for installation or replacement:
H07 RN-F, H05 RN-F, H05 RRF, H05 VV-F, H05 V2V2-
F (T90), H05 BB-F.
34
Содержание ZKB7630
Страница 72: ...www electrolux com shop 397205601 A 052011 ...