Zander Aachen ZX09 Series, Руководство по эксплуатации

Страница: 7 / 75

H. ZANDER GmbH & Co. KG • Am Gut Wolf 15 • 52070 Aachen • Germany • Tel +49 241 9105010
Fax +49 241 91050138 • info@zander-aachen.de • www.zander-aachen.de
7
Operating manual ZX09/20/21-Series
2. General safety instructions

Only authorised and qualified personnel may install the device and
put it into operation, i.e. personnel which
- is well-acquainted with correct technical handling of the
electrical machine equipment,
- is familiar with the applicable regulations concerning occu-
pational safety and accident prevention,
- has read and understood the operating manual and, if
applicable, the programming manual

In case of incorrect connection or inappropriate use, the safe func-
tioning of the device during the machine operation will no longer be
guaranteed. This can result in fatal injuries or serious material loss.

Please observe the national guidelines, which are valid for the com-
missioning of the device.

The electrical connection of the device must take place only when
the voltage supply is switched off. This also applies to the connected
sensors and actuators.

The wiring of the device must be done in conformance with the
instructions given in this operating manual.

The person, who installs the device and puts it into operation, must
be adequately protected against electrostatic charge (earthing strap
or ESD shoes along with ESD flooring).

Opening of the device and any manipulations to the device are not
allowed; and shall result in loss of warranty and warranty claims.

Please observe all the relevant safety guidelines and standards.

Non-observance of the safety guidelines may lead to death, severe
injuries and serious material damage.

Please read the operating manual before use and preserve it care-
fully.

Please ensure that the operating manual is always available at the
time of assembly, commissioning and maintenance work.