7
H. ZANDER GmbH & Co. KG • Am Gut Wolf 15 • 52070 Aachen • Germany
Tel +49 241 9105010 • Fax +49 241 91050138 • [email protected] • www.zander-aachen.de
P01
E61-456-00
Dimensions
For your safety
Product
description
Quick Start Guide
English Translation
Errors and technical changes reserved
Quick Start Guide ZX-FPGA-PLC
The device may only be installed and put into operation by authorized qualified personnel,
who is familiar with the proper handling of electrical machine equipment
who is familiar with the applicable regulations for occupational safety and accident prevention
and who has read and understood the operating manual and, if applicable, the programming manual
The safe functioning of the device during machine operation can no longer be guaranteed if it is connected incorrectly or
used for purposes other than those for which it was intended. This can lead to fatal injuries or high material damage.
When installing the device, the country
-
specific regulations must be observed.
The electrical connection of the device may only be carried out when it is de
-
energized. This also applies to the connected
sensors and actuators.
The wiring of the device must comply with the instructions in this operating manual.
Opening the device and any manipulation of the device is not permitted and will result in the loss of warranty or guarantee
claims.
All relevant safety regulations and standards must be observed.
Before use, read the detailed operating instructions, which you can download from our website, and keep them in a safe
place. Make sure that the operating instructions are available at all times during assembly, commissioning and maintenance
work.
The ZX09 and ZX20/21 series controllers are high
-
speed industrial FPGA based programmable logic controllers (PLC). They
can be used both as stand
-
alone PLCs and in a network as decentralized PLCs for parallel processing of signals in real time.
This is made possible by the heart of every ZX controller: a Field Programmable Gate Array (FPGA). This enables the fastest
possible and always consistently fast processes without cycle time in absolute parallelism.
Dimensional drawing (identical measures for all controller types)
90 mm
63
mm
10
8
mm
