FUNCTIONING
EXAMPLE OF INSTALLATION
CONNECTING
MOUNTING
1. Disconnect the power supply from the mains
by the phase fuse, the circuit breaker or the
switch disconnector that are joined to the
proper circuit,
2. Check if there is no voltage on connection
cables by means of a special measure
equipment,
3. Install PCM-01 device in the switchboard on
TH 35 DIN rail,
4. Connect the cables with the terminals accord-
ing to installing diagram,
5. Switch on the power supply from the mains,
6. Adjust the time using the
TIME
and
RANGE
knobs, where
t=TIMExRANGE
.
Switching on the power supply voltage caus-
es the green LED luminosity. The cycle wil be
automatically initiated with the adjusted t time.
DIMENSIONS
PRODUCT FAMILY
PCM-01 time relay belongs to PCx time
relay product family.
RELAY CAPACITY
INNER DIAGRAM
U
t
t
SWITCH ON DELAY - after the supply voltage [U] has been applied the
time measure t starts. After the time is over the relay switches on (pos.
11-14).
U
Diodes’ function
description
Time adjustment example t
☼
☼
☼
☼
relay switched on (closed
contacts 11-14), counting
time off
1
10
5 6
7
8
9
2
3
4
TI
ME
0,1s
OFF
1s
10s
1min
10min 1h 10h
1d
ON
RA
NG
E
t
=
TIME
x
RANGE
,
t = 8 x 1 d = 8 d
☼
☼
☼
☼ relay switched off (closed
contacts 11-12) counting
time on
TI
ME
1
10
5 6
7
8
9
2
3
4
0,1s
OFF
1s
10s
1min
10min
1h
10h
1d
ON
RA
NG
E
t
=
TIME
x
RANGE
,
t = 3 x 1 h = 3 h
Warning system before the motor starts up.
PCM-01 time relay works in the system where after pushing the START/STOP button a warning acous-
tic signal is heard to inform the motor is just to start up. This relay cooperates with PCM-04 in bistable
relay mode with limited time (MODE=I), it enables to switch on/off the engine by means of one button
as well as to set max possible working time.
GUARANTEE CARD
There is 24 months guarantee on the product
Salesman stamp and signature, date of sale
Voltage type:
24V - 24 V AC/DC
U - 12÷240 V AC/DC:
available for
PCM-01, PCM-02, PCM-03, PCM-06
U - 24÷250 V AC; 30÷300 V DC:
available for
PCM-07
Device type:
01 - 1 operating mode – switch on delay
02 - 1 operating mode – switch off delay
03 - 1 operating mode – cyclic change over
04 - 8 (PCP-04) or 10 (PCM-04) operating
modes
06 - 2 operating modes - switch on/ switch
off delay
07 - 25 operating modes, digital, two ranges of
time operation
10 - 10 operating modes, two ranges of time
operation
Casing type:
M - modular version (TH 35 DIN rail)
P - flush junction box Ø60 version
Device symbol
1. ZAMEL Sp. z o.o. shall offer a 24-month warranty on the products sold.
2. The warranty provided by ZAMEL Sp. z o.o. shall not cover:
a) mechanical damage caused during transport, loading/unloading or in other circumstances,
b) damage caused by incorrect installation or operation of products manufactured by ZAMEL Sp. z o.o.,
c) damage resulting from any changes made by the BUYER or third parties in the products sold or equipment necessary for the
proper operation of the products sold,
d) damage resulting from force majeure or other fortuitous events for which ZAMEL Sp. z o.o. is not liable.
3. Any warranty claims shall be made by the BUYER at the point of sale or to ZAMEL z o.o. in writing after defects have been identi-
fied.
4. ZAMEL Sp. z o.o. undertakes to handle complaints in accordance with the applicable provisions of Polish law.
5. The choice of the form of complain resolution, e.g. replacement of a product with a product free from defects, repair, or reimburse-
ment of money, shall lie with ZAMEL Sp. z o.o.
6. The warranty does not exclude, limit, or suspend BUYER’s rights under the statutory warranty for defects in the item sold.
N
L
11
12
14
µC
A/C
START/STOP
