Use and programming
Once completing the programming, place
the programming switch back in the OFF
position.
Repeat the following operation for the
programming of the remaining buttons :
For programming with pre infusion
repeat steps 3 to 6
For programming with no pre infusion
repeat steps 7- 8 and 5
Programming with no pre infusion
(Buttons must be lit up, if not press T5)
Put the coffee cup under the dispensing
spout.
Press and hold the button to be
programmed until the desired dose is
obtained.
Press button T5 to confirm.
Press button T5 to confirm.
7
6
9
8
8
Flash
Flash
Flash
Light
Light
Light
Light Light
T1
T2
T3
T4
T5
T5
T4
T3
T2
T1
0
1
2
T1 T2 T3 T4 T5
9
Programming with pre infusion
(Buttons must flash, if not press T5)
Put the coffee cup under the dispensing
spout.
Press the button to be programmed and
hold for as long as you want the pre-
infusion. (Aprox. from 1 to 3 sec)
Wait up to 2 sec. (Infusion time)
Press and hold the same button again
until the desired dose is obtained.
4
4
6
5
5
3
T1
T1
T2
T2
T3
T3
T4
T4
T5
T5
T5
T4
T3
T2
T1
T5
T4
T3
T2
T1
10
ZagatO
!
NOTE
Programming
switch located
inside
machine
OFF
Espresso Italia PTY LTD
www.espressoitalia.com.au
Freecall 1300 660 976
