background image

1.  KEEP WORK AREA CLEAN AND DRY

      Cluttered, damp or wet work areas invite injuries.

2.  KEEP CHILDREN AWAY FROM WORK AREA

      Do not allow children to handle this product.

3.  STORE IDLE EQUIPMENT

      When not in use, tools and equipment should be stored in a dry location to inhibit    
      rust. Always lock up tools and equipment and keep out of reach of children.

4.  DO NOT USE THIS PRODUCT IF UNDER THE INFLUENCE OF ALCOHOL OR   

     DRUGS

      Read warning labels on prescriptions to determine if your judgment or reflexes are     
      impaired while taking drugs. If there is any doubt, do not attempt to use this  

 

      equipment.

1.

  The Turn Tables are designed to indicate whether the front end wheel alignment of a  

     compact car or lightweight truck is in need of adjustment.

2.

  Should the Turn Tables indicate a need for front end wheel alignment adjustment  

     (usually by means of adjusting the vehicle’s tie rods), it is recommended that only a  
     qualified technician perform the service, and not while the vehicle is still on the Turn  
     Tables.

When unpacking, check to make sure all parts shown below are included. If any parts are 
missing or broken, please call Zackman Scientific at the number shown on the back cover 
of this manual as soon as possible.

Included in this product:

  •  2x Turn Plate 

 

•  2x Plate Handle   

•  User Manual

PRODUCT OVERVIEW

WHAT’S INCLUDED

GENERAL SAFETY WARNING 

& PRECAUTIONS

2

© Zackman Scientific

  

Содержание ZAWG008













Отзывы: