1. MAINTAIN A SAFE WORK ENVIRONMENT
Keep work area well lit. Make sure there is adequate surrounding work space.
2. DO NOT FORCE THE EQUIPMENT
The Turn Tables will do the work better and safer below or at the weight capacity
(3,000 lbs. or 1.5 Tons per pair) for which they were designed. Do not exceed the
weight capacity. The Turn Tables will break under dynamic loading.
Caution: Always be aware of Dynamic Loading. If you drop a weight on the Turn
Tables, it may create for a brief instant, an excess load. The Turn Tables are designed
for 3,000 lbs. or 1.5 Tons per pair maximum load; do not exceed.
3. MAKE SURE THE TURN TABLES ARE POSITIONED ON A DRY, FLAT, LEVEL
SURFACE
Do not position the Turn Tables on an uneven surface or a surface covered with ice,
grease, oil, or any other substance that may cause the Turn Tables to tip over or slide
when driving a vehicle up onto the Turn Tables.
4. ADDITIONAL HELP MAY BE REQUIRED TO GUIDE THE VEHICLE ONTO THE
TURN TABLES
Another person, standing a safe distance away from the vehicle, may be needed to act
as a visual guide as you drive the vehicle onto the Turn Tables.
5. ALWAYS MAINTAIN THE SLOWEST SPEED POSSIBLE WHEN DRIVING THE
VEHICLE ONTO AND OFF OF THE TURN TABLES
6. ONCE THE VEHICLE HAS BEEN POSITIONED ON THE TURN TABLES
IMMEDIATELY TURN OFF THE ENGINE, SET THE PARKING BRAKE, AND
BLOCK THE REAR TIRES
Never attempt to use the Turn Tables while the engine is running. Turn off the engine,
set the parking brake, carefully exit the vehicle, and block the rear tires with wheel
chocks or blocks of wood to prevent the vehicle from rolling while being serviced.
7. NOTE
It is recommended that the vehicle manufacturer’s manual, and/or a qualified
technician, be consulted to determine the front end wheel alignment degree of
tolerance difference allowable for the vehicle make and model being tested.
8. NEVER WORK UNDERNEATH A VEHICLE WITHOUT USING ADDITIONAL
SAFETY SUPPORT DEVICES (I.E., JACK STANDS) TO SUPPORT THE VEHICLE.
The Turn Tables are not designed to be used with jack stands and no one should
work under vehicle while vehicle is on Turn Tables.
SPECIFIC PRODUCT WARNINGS
& PRECAUTIONS
4
© Zackman Scientific
™
Содержание ZAWG008
Страница 11: ...NOTES 9 www zackmanscientific com...
