background image

 

 

 

 

Z3Stream User Instructions

 

 

 

 

DOC-USR-0090-04

 

 
 

___________________________________________________________________________________________ 

Z3 Technology, LLC 

 100 N 8

th

 ST, STE 250 

 Lincoln, NE 68508-1369 USA 

 Z3Stream.com 

23 

7.3

 

Stream RTMP 

 

RTMP (Real Time Messaging Protocol) is a network protocol designed for playing Flash video. The 

Z3

Stream

 supports streaming to an RTMP streaming server for wide content distribution.  Z3 

Technology is a member of the Wowza Media Systems

TM

 Technology Alliance partner program, and the 

Wowza Streaming Engine

TM

 is used as an example. 

 

 

7.3.1

 

RTMP Encoder Setup – Wowza Streamting Engine™ 

(1)

 

Under Output Setup, select 

RTMP

 in the 

Output Format

 dropdown menu. 

(2)

 

Set 

Dest Address

 to “

IP_Address: port#/application/Stream_Name

”. 

a.

 

IP_Address

 will be the IP address of the PC with the Wowza server. In this example, 

192.168.0.4 is used. 

b.

 

port#

 will be the port number of the PC with the Wowza server. In this example, 1935 is 

used. 

c.

 

application

 will need to match the application selected in Wowza.  In this example the live 

application is used. 

d.

 

Stream_Name

 will need to match the stream information you provide to the Wowza server.  

In this example, 720 is used. 

e.

 

In this example, the full destination address would be “192.168.0.4:1935/live/720”. 

(3)

 

If necessary, set 

Authentication

 to 

Enable

 and enter your valid Wowza log in credentials. 

 

Содержание Z3Stream-01





















































Отзывы: