Z3Stream User Instructions
DOC-USR-0090-04
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
Z3Stream.com
15
6.2
Composite Encoder Setup
(1)
Select a video source with composite output.
(2)
Verify your source works as expected:
a.
Power on the video source.
b.
Connect composite from the source output to a TV or monitor.
c.
Change your source settings so that its output is at your desired resolution. In the following
example, we are using 720x480 resolution.
d.
If you are using a video player, select the content you would like to stream.
e.
If you see playback on the monitor, you’ve confirmed the source works.
(3)
Using the special composite adapter cable that came with your encoder (pictured below), connect
the yellow/red/white cables to your composite source.
a.
The yellow connector connects to the composite output.
b.
The red and white connectors connect to the analog audio outputs.
(4)
Connect the special adapter end of the cable to
A/V In
on the encoder.
Figure 9 Composite Adapter Cable
Figure 10 Composite Connection for Encoding
Connect
Composite
Here
