DOC-USR-0027-10
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
49
9.7
Values Appearing at the Bottom of All Tabs
Parameter
Options (default in bold)
Notes
preset
serial_menu
encoder factory default
(any user-defined profiles)
The configuration file to use.
serial_menu = Last value saved in GUI
encoder factory default = Factory defaults
Can also add more profiles by clicking on “new”
in the User Presets tab.
Save
Click on this to save preset value to what was
selected.
Operating Mode
Encoder Interlaced/Progressive
Encode Single Ch No Scale
Decoder
This selects how the Z3-MVPR-02 is being used.
“Encoder Interlaced/Progressive” is the default
mode of operation – it can be used to encode up
to two channels.
“Encode Single Ch No Scale” is used when one
1080p60 encode is desired.
“Decoder” is used to set the Z3-MVPR-02 in
decoder mode.
Stop All
Stop encode on all channels.
Start All
Start encode on all channels.