Z3 Technology Z3-MVPR-02, Руководство пользователя

Страница: 14 / 52

DOC-USR-0027-10
___________________________________________________________________________________________
Z3 Technology, LLC ♦ 100 N 8
th
ST, STE 250 ♦ Lincoln, NE 68508-1369 USA ♦ +1.402.323.0702
14
6.4 Configure CH1 and Encode
(11)
At the CH1 tab, set “Output Format” to UDP and “Dest Address” to the IP address of your PC (in
this example, 192.168.0.6). Also make note of the value of “Dest Port” (should be 5004 by
default).
(12) The encoder may have already started (after 20 seconds, the encoder will automatically try to
start). If it has, click on “stop” near the bottom of the screen. The status should then change to
“STOPPED”. Then click on “start”. Once you do this, the status will change to “RUNNING.” If
the encoder hadn’t started already, simply click on “start” and observe the status change.
Figure 9 Channel 1 Configuration Screen – UDP
(1) Change
to UDP
(2) Change to IP
Address of your PC
(3) Note “Dest Port”
value
(4) If enc autostarted,
click “stop”
(5) Click “start”
(6) Status changes
to “RUNNING”