background image

3

 

 

 

 

DOC-USR-0034-08 

 

____________________________________________________________________________________

 

Z3 Technology, LLC 

 100 N. 8th St. STE 250 

 Lincoln, NE 68508-1369 USA 

 +1.402.323.0702 

TABLE OF CONTENTS 

1.0 GENERAL INFORMATION ................................................................................................. 5

 

 Preface ................................................................................................................. 5

 

1.1

2.0 QUICK START GUIDE ..................................................................................................... 5

 

 If you have Received a System from Z3 with the Software Preloaded ........................................ 5

 

2.1

 If you already have a System from Z3 and need to Update the Firmware .................................... 5

 

2.2

3.0 INCLUDED PARTS LIST ................................................................................................... 6

 

4.0 FEATURES ................................................................................................................. 7

 

 Supported Encoder Resolutions ..................................................................................... 7

 

4.1

 Supported Decode Resolutions ...................................................................................... 7

 

4.2

5.0 OPERATING CONTROLS .................................................................................................. 8

 

6.0 GETTING STARTED AND RUNNING THE ENCODER .................................................................... 9

 

 Setting up the Video Source ......................................................................................... 9

 

6.1

  Connecting and Powering up the Z3-MVE-20 ..................................................................... 9

 

6.2

 Finding the Z3-MVE-20 on the Network using ZFinder .......................................................... 10

 

6.3

 Configure Encode .................................................................................................... 12

 

6.4

 Run VLC to View the Encoded Stream ............................................................................ 14

 

6.5

 Streaming RTP ........................................................................................................ 15

 

6.6

 Run VLC to View the Encoded RTP Stream ....................................................................... 16

 

6.7

 Dynamically Changing Bitrate and Frame Rate .................................................................. 17

 

6.8

 Tuning for Latency ................................................................................................... 18

 

6.9

 Encoding Closed Caption Data .................................................................................... 19

 

6.10

7.0 RUNNING DECODE ON THE Z3-MVE-20 ............................................................................... 21

 

8.0 PERFORMING OTHER OPERATIONS WITH THE Z3-MVE-20 ......................................................... 25

 

 Saving Current Settings ............................................................................................. 25

 

8.1

 Using A Static IP Address ............................................................................................ 26

 

8.2

 Making a Firmware Update ......................................................................................... 28

 

8.3

8.3.1 Updating Firmware from the User Interface ................................................................ 28

 

8.3.2 Updating Firmware from an SD Card ......................................................................... 29

 

 Using the Password Feature ........................................................................................ 30

 

8.4

9.0 SUMMARY OF OPTIONS ................................................................................................. 31

 

 Options in Both the Encoder and Decoder Mode ................................................................ 31

 

9.1

 Encoder Options ...................................................................................................... 31

 

9.2

 Decoder Options ..................................................................................................... 35

 

9.3

APPENDIX A: Installing Ear Rack Mounts on the Z3-MVE-20 ........................................................... 36

 

APPENDIX B: Troubleshooting ............................................................................................. 37

 

Содержание Z3-MVE-20






































Отзывы: