28
DOC-USR-0034-08
____________________________________________________________________________________
Z3 Technology, LLC
♦
100 N. 8th St. STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
Making a Firmware Update
8.3
There are two methods to make an update: Through the user interface and by using the SD Card. Both
methods are described below.
8.3.1
Updating Firmware from the User Interface
Bring up the user interface (steps (1)-(8) in Section 6.0).
(1)
On the Main Screen, click “UPDATE”.
(2)
This brings you to the Update Image screen. On this screen, click on “Browse…”
(3)
Select the name of the .img file to update with an click “Open.”
(4)
*Note:
If using a MFR.img to update from version A to version B (as an example), you will need to
follow steps to set up the IP/MAC address again, as it resets it to factory defaults. Please contact
Z3 Technology for documentation on how to update. In general, it is recommended that the
“UPD.img” file be used rather than the “MFR.img.”
Click on “Upload and Update.”
(5)
You will see screens stating that the image is being uploaded and the flash is being updated.
(6)
After about one minute, the main menu appears.
Your Z3-MVE-20 is now updated.
(7)
Click here
Figure 30 The “UPDATE” Button
Figure 31 The Update Image Screen
