24
DOC-USR-0034-08
____________________________________________________________________________________
Z3 Technology, LLC
♦
100 N. 8th St. STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
The user interface will change to the Decoder configuration menu.
(10)
Select Ethernet for the “Input Interface.”
(11)
Select MPEG-2 TS for “Input Format.”
(12)
“IP:Port” should be “225.1.2.3.8888”.
(13)
Because the encoded stream was created by the Z3-MVE-20 Encoder 1, click the “MVE Flag”
(14)
checkbox. This will allow for a faster decode.
*Note:
Check the MVE Flag box whenever the encoder used is the ZEUS
TM
Z3-DME-01, Z3-MVE-02,
Z3-MVE-10, Z3-MVPR-01 or another Z3-MVE-20 to allow for a faster decode.
Select SDI for “Output Interface”
(15)
Click “Start Decoder.” You will see video output on the monitor.
(16)
Figure 24 Z3-MVE-20 Example Decoder Settings for End-to-End Streaming
