Z3 Technology Z3-DM368-ZDVR Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 33

background image

CONFIDENTIAL

Z3-DM368-ZDVR V1.03.01

___________________________________________________________________________________________

Z3 Technology, LLC

♦

100 N 8

th

ST, STE 250

♦

Lincoln, NE 68508-1369 USA

♦

+1.402.323.0702

8

3.

Untarring and Building the Sample Code

3.1 Preparing the Linux Environment

Prior to building the Z3 sample code, certain modules are required. In Ubuntu 10.x or later, the following
command can be used to get the required modules:

sudo apt-get install bison flex mtd-utils liblzo2-dev uuid-dev zlib1g-dev

libpcre3-dev autoconf autoconf-archive automake automake1.9 automake1.9-doc
libtool libtool-doc gstreamer-tools libglib2.0-dev mono-gmcs gperf

In Fedora, the command would be:

sudo yum install bison flex mtd-utils mtd-utils-ubi lzo-devel libuuid-devel

pcre-devel automake automake17 automake14 autoconf libtool gstreamer-tools
glib2-devel mono-core gperf

If you are running a 64-bit OS, it may be necessary to install some 32-bit libraries for the cross-compiling
toolchain. You can determine whether your OS is 64-bit by using the “uname –p” command. A 64-bit OS
will return “x86_64,” while a 32-bit OS will return “i386”, “i586”, or “i686”.

For 64-bit Ubuntu, you can get the necessary libraries by typing:

# sudo apt-get install ia32-libs

For 64-bit Fedora, you can type:

# sudo yum install glibc.i686

3.2

Making the Directories and Running the Make Script

The software provided will allow you to re-create the pre-installed software of the Z3-DM368-RPS starting
from the included source code.

On a PC running Linux, create a directory where the released materials are going to be located:

# mkdir /home/z3/z3-dm368

Copy the released tar archive to that directory (note: could also be RPS-SRC, name may slightly vary).

# cp SW-3D2-00123-01_DM368-ZDVR-20131211.tar.bz2 /home/z3/z3-dm368

Untar the archive (name of tar file may slightly vary):

# tar -xvjf SW-3D2-00123-01_DM368-ZDVR-20131211.tar.bz2

Note: Untarring could take 5 to 10 minutes.

Then go into the directory just created and run the build script (directory name may slightly vary):

# cd z3-dm368-ZDVR-20131211

# ./makeall

«
...
6
7
8
9
10
...
»

Содержание Z3-DM368-ZDVR


































Отзывы:

Нет отзывов

Похожие инструкции для Z3-DM368-ZDVR

Бренд: XDS Страницы: 99

Бренд: Lattice Semiconductor Страницы: 15

iCE40 UltraLite

Бренд: Lattice Semiconductor Страницы: 13

Бренд: CSS Страницы: 2

Бренд: STONEFLY Страницы: 48

Бренд: XNET Страницы: 17

Бренд: ICP DAS USA Страницы: 8

PISO-725 Series

Бренд: ICP DAS USA Страницы: 8

Бренд: Valcom Страницы: 4

Бренд: IEI Technology Страницы: 3

Бренд: Eneo Страницы: 68

Бренд: Digital Equipment Страницы: 90

Бренд: Lanpro Страницы: 3

Бренд: Lefroy Brooks Страницы: 10

ExpressCard 11-in-1 Reader/Writer

Бренд: SIIG Страницы: 8

Бренд: IBM Страницы: 242

Бренд: Honeywell Home Страницы: 36

Бренд: ZyXEL Communications Страницы: 263

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды