Z3 Technology MVPR-02, Инструкция пользователя

Страница: 18 / 31

CONFIDENTIAL DOC-USR-0027-07
___________________________________________________________________________________________
Z3 Technology, LLC ♦ 100 N 8
th
ST, STE 250 ♦ Lincoln, NE 68508-1369 U.S.A. ♦ +1.402.323.0702
18
5.7 Encoding from Other Inputs
In addition to HDMI1, the Z3-MVPR-02 allows encode from a second HDMI channel, 2 component inputs,
and 2 composite inputs.
HDMI1, Component1, and Composite1 are all accessible from the “CH1” tab. HDMI2, Component2, and
Composite2 are all accessible from the “CH2” tab.
Most combinations are allowed. However, because of the way the hardware is configured within the
Z3-MVPR-02, two combinations are not allowed. For both of those combinations, an alternative is available.
Figure 15
below shows the combinations that are allowed and not allowed on the Z3-MVPR-02.
CH1 CH2 Allowed? Notes
HDMI1 HDMI2 Yes
Component1 Component2 Yes
Composite1 Composite2 Yes
HDMI1 Component2 Yes
HDMI1 Composite2 No Use Comp HDMI2 instead
Component1 HDMI2 Yes
Component1 Composite2 No Use Comp Component2 instead
Composite1 HDMI2 Yes
Composite1 Component2 Yes
Figure 15 Allowed Input Combinations on the Z3-MVPR-02
For Component inputs, Component1 is on the right side looking at the rear panel while Component2 is on
the left (see
Figure 3
). If a standard A/V cable is being used, the following mapping is used: red ->
red, white -> blue, yellow -> green (as shown in
Figure 16
).
For Composite inputs, the same input jack as Component1 is used. The yellow connector is used for
Composite1 and the red connector is used for Composite2.
Figure 16 Mapping of A/V Cable to Component Jacks