Z3 Technology MVPR-02 Скачать руководство пользователя страница 31

Страница: 31 / 31

CONFIDENTIAL

DOC-USR-0027-07

___________________________________________________________________________________________

Z3 Technology, LLC

♦

100 N 8

ST, STE 250

♦

Lincoln, NE 68508-1369 U.S.A.

♦

+1.402.323.0702

APPENDIX A: Troubleshooting



Problem:

Web interface does not come up

-Is the Ethernet cable plugged into the Z3-MVPR-02 solidly (do you see the link light on the Ethernet

cable which indicates data is being transmitted)?

-Does the Z3-MVPR-02 IP address and PC IP address have the same first 2 values (or, if netmask is set

to 255.255.255.0, the same first 3 values)?

-Do the Z3-MVPR-02 and the PC running VLC have the same netmask? (Default value in the Z3-MVPR-

02 is 255.255.0.0)

-Can the Z3-MVPR-02 and the PC see each other?

-Try pinging the Z3-MVPR-02 from the PC.

-Try pinging the PC from the Z3-MVPR-02 (serial interface required for this – see Z3 for details).

-Are all firewalls on the network turned off?

-Try connecting the PC directly to the board without any routers, etc.



Problem:

Do not see video in VLC (UDP)

-Does the IP address set in “Dest Address” equal the IP address of the PC running VLC?

-Does the port number in “Dest Port” equal the value entered in the URL for VLC?

-Does the video coming out of the source match the resolution in the encoder settings?

-Is the PC fast enough for 1080p decode on VLC?

-Does the PC have enough DDR to handle 1080p decode on VLC?

-Is VLC version 1.1x or later?



Problem:

Do not see video in VLC (RTP)

-Is “Dest Port” set to 5004?

When contacting Z3 Support for additional support, please capture and include a log file with the
diagnostic level set to analysis.

For information regarding your hardware warranty, please visit:

http://Z3technology.com/support/hardware-warranty/

Содержание MVPR-02
































Результаты поиска

Содержание MVPR-02

Отзывы:

Похожие инструкции для MVPR-02

Бренды по названию

Популярные бренды

Z3 Technology MVPR-02, Инструкция пользователя

Результаты поиска

Содержание MVPR-02

Отзывы:

Похожие инструкции для MVPR-02

Бренды по названию

Популярные бренды