DOC-USR-0113-01
___________________________________________________________________________________________
6
2.0
QUICK START GUIDE
If You Have Received an Decoder with the Software Preloaded
2.1
To start working with the encoder, you can go straight to Section 7.0, “RUNNING THE DECODER,” on
page 11. This section describes how to decode an RTSP or TSRTP stream and how to utilize Pro-MPEG
Forward Error Correction.
If You Already Have an Decoder and Need to Update the Firmware
2.2
You can update the firmware via the HTTP-based user interface (GUI) by following the instructions in
Section 8.3 “Making a Firmware Update” on page 20.
Please Note:
Actual version numbers for your DMD-10J product may differ from those pictured in this document.
