DOC-USR-0113-01
___________________________________________________________________________________________
26
The CH1 Tab
9.2
Parameter
Options (default in bold)
Notes
Input Selection
Input Interface
RTSP
TSRTP
Output format for the video stream to be received.
Server IP
(RTSP Only)
10.1.10.237/z3-1.sdp
Enter the IP address of the encoder that is the source
of the RTSP stream followed by “/z3-1.sdp”
Is Multicast
(TSRTP Only)
Checked
Unchecked
If decoding from a multicast address, check this. This
will cause an “Address” box to appear where the user
can type the multicast address the decoder should
connect to.
Address
(Multicast Only)
x.y.z.w
(225.1.2.3)
The multicast IP address that the decoder retrieves
data from (used when “RTP” or “UDP” is selected for
the Input Interface and “Is Multicast” is checked).
Port (TSRTP Only)
0 – 9999 (
8888
)
The port the decoder retrieves data from.
FEC Mode
(TSRTP Only)
Auto
, Off
Selects whether Pro-MPEG Forward Error Correction
(FEC) is enabled.
Channel Controls
stop
Stop current encode session.
start
Start encode session.
status
STOPPED, RUNNING,
POLLING
Current status of the decoder. “POLLING” indicates
“start” was pressed and the decoder is waiting for
valid input data to be detected. Errors will be
preceded by an exclamation point (!).
