DOC-USR-0113-01
___________________________________________________________________________________________
11
7.0
RUNNING THE DECODER
This section gives step-by-step instructions on HEVC/H.265 decoding compressed video with the DMD-10J
and displaying 1080i video to a TV. In addition to the DMD-10J, a video encoder or other source for
compressed content and an HD TV or monitor with SDI input are required.
Please Note:
Actual version numbers for your DMD-10J product may differ from those pictured in this document.
Connect and Power On the DMD-10J
7.1
Connect an Ethernet cable from “Ethernet” on the back of the DMD-10J to a switch, router or other
(1)
DHCP server on the same network as your Windows PC and the video encoder that will be sending
the compressed stream.
Connect “SDI Out” on the rear panel of the decoder to the HD TV or monitor.
(2)
Connect the 12V power supply and turn on the power switch. It will take 20-30 seconds to boot.
(3)
Access the User Interface using ZFinder
7.2
ZFinder is a PC Utility that allows you to find any Z3 Technology product on your network. If you have
not downloaded this to your computer, you can find it on your customer account on Z3 Technology’s
support server.
Figure 2 SDI Encode Connections
(2) Connect
SDI Output
to a TV
(1) Connect to
Ethernet
(3) Connect to
12V Power
(4) Turn on
Switch
