Z-World Wolf BL2600, Руководство пользователя

Страница: 43 / 106

User’s Manual 39
•
DAC_VOLT_SYNC.C
—Demonstrates how to output a voltage that can be read with a
voltmeter. The output voltage is computed with using the calibration constants that are
stored in the reserved EEPROM.
The D/A converter circuit is set up for synchronous operation, which updates the D/A
converter output when the
anaOutStrobe
function call executes. The outputs will be
updated with values previously written via the
anaOut
or
anaOutVolts
function calls.
4.2.6 Use of BL2600 with SF1000 Serial Flash Card
The following sample programs found in the
SF1000
subdirectory in
SAMPLES\BL2600
demonstrate the use of the optional SF1000 serial flash card on the BL2600. The SF1000
User’s Manual contains additional information and API functions for the SF1000.
•
FLASH_PATTERN_INSPECT.C
—Writes a pattern to the first 100 sectors of the
SF1000, which can then be inspected or cleared by the user. The user then has the
option to either inspect or clear a page of serial flash memory.
•
SFLASH_TEST.C
—Demonstrates how to read and write data from/to the SF1000.
Once the sample program is compiled and run, it displays a message in the Dynamic C
STDIO
window to report whether the test was successful.
4.2.7 TCP/IP Sample Programs
TCP/IP sample programs are described in Chapter 5.
4.3 BL2600 Libraries
Two library directories provide libraries of function calls that are used to develop applica-
tions for the BL2600.
•
BL2600
—libraries associated with features specific to the BL2600. The functions in the
BL26xx.LIB
library are described in Section 4.4, “BL2600 Function APIs.”
•
RN_CFG_BL26.LIB
—used to configure the BL2600 for use with RabbitNet peripheral
boards.
•
TCPIP
—libraries specific to using TCP/IP functions on the BL2600. Further informa-
tion about TCP/IP is provided in Chapter 5, “Using the TCP/IP Features.”