24
Copying Network Information to a Secondary Controller
You can add a secondary controller to your network and copy all of
your primary controller
’
s network information to the secondary
controller by following the steps below.
Step
Setup Key
LED Indication Status
1
Press & hold
for 3 seconds
•
“
OK
＂
LED on
2
Place the two controller
close to each other
-
3
Type
“
8542
＂
on the
setup number keypad
•
“
OK
＂
LED flashes
once for each number
input
•
“
OK
＂
LED keeps
blinking after entering
the 4-digit
4
Please make sure the
target controller is setup
to receive information.
(Refer to the target
controller user manual
for more information)
•
“
OK
＂
LED flashes
once then turns off
•
Replication completed
Note1: If the replication is unsuccessful, the “OK” light turns off and
the error light will flash 6 times then turn off.
