- 31 -
If an error is detected by the self-test, kindly contact Z Rapid technical
support and provide the error code obtained from the self-test for us to
resolve the problem.
3. Adjusting the laser power
The laser power has the attenuating property and the power value is
important for solidifying the parts. If necessary, under guidance by Z
Rapid technical support, you may change some parameters to adjust the
laser power.
Press the HOME button to enter the Main Display menu. This displays
the default mode upon system start-up.
Appendix figure 3. HOME Interface
(Parameters displayed may differ from those in your laser settings)
