- 11 -
d)
Turn on the laser controller as described in Appendix 1–RFH Laser or
Appendix 2–Inggu Laser according to the model of your laser system.
2.2.2 Stop SL
a)
Push the Heater On button to turn function off if temperature control
system is in use. Push the Light On button to turn off the LED lights in
the build chamber.
b)
Shut down the OS.
c)
Turn off the laser controller as described in Appendix 1–RFH Laser or
Appendix 2–Inggu Laser according to the model of your laser system.
d)
Push the Laser On button to turn off the laser system.
e)
Push the Control On button to turn off the control system.
f)
Turn the main power switch anti-clockwise to shut down the
machine.
Note:
Please shut down the machine as the above method if it is not to
be in use for a prolonged period of time. When not in use for a short
period, do not turn the laser power off, just push the LDD/Diode and
QSW/QS-On buttons on the laser controller. The resin should also be
drained from the vat into storage containers. To preserve the resin, these
containers should be stored away from sunlight and in a temperature
and humidity controlled place.
