- 17 -
Figure 17.Platform Window
Z Axis
: Control the movement of build plate, upwards or downwards.
Position in Z/Coating Axis indicates the relative position of the
build plate/recoater to home position.
Go to zero position.
R Axis
: Control the movement of resin plunger (used to adjust the
resin level), upwards or downwards.
Level in R Axis indicates the resin level value measured by sensor.
Coating Axis
: Control the movement of recoater (used to sweep the
resin), forwards or backwards.
Stir
: Move the build plate upwards and downwards in the vat to stir
the resin (see details in Figure 18).
Laser
: To measure & display the laser power, turn on/off the QSwitch
& Diode, set the current/ratio of the laser, move the laser to
Home/To Park positions, etc. (see details in Figure 19).
Resin Level
: Resin level indicator. When the resin level is low, the
