Z Corporation zprinter 350, Быстрый старт

Страница: 5 / 16

zcentral.zcorp.com 5
2. Check The Printer
Before you start your print job, it’s important that you check the
printer.
A clean, well-maintained printer produces better
parts, has less downtime, and needs fewer service calls.
1. Check for loose powder in or around the Build Bed, Fast
Axis, and Deck. If you need to clean these areas, follow the
steps in
Section 6.1, “Vacuum Up Excess Powder” .
2. Check that the Debris Separator, the Rails and Carriage, the
Service Station and Parking Caps are clean. If any of these
need cleaning, follow the procedures in these sections:
• Section 6.2 , “ Empty The Debris Separator ”
• Section 6.3 , “ Clean The Rails and Carriage ”
• Section 6.4 , “ Clean The Service Station ”
• Section 6.5 , “ Clean the Parking Caps (ZPrinter
450 only) ”
Service
Station
Build
Bed
Deck
Fast
Axis
Deck
Debris Separator
Rails and Carriage
(hidden)
Parking
Caps
(450 only)