zcentral.zcorp.com
9
6.4 Clean The Service Station
Before you begin:
•
Get several dry paper towels and a cotton swab.
•
Get the squirt bottle filled with distilled water.
•
Wear disposable gloves.
•
Get the Pick and Syringe from the Accessories Kit.
1.
Open the printer top cover and the Service Station cover.
2.
Place paper towels around the Service Station. Also cover
the front overflow and the Build Bed.
3.
Pull the Service Station wiper lever all the way forward until
the rubber squeegees are fully exposed. Hold the lever in
this position while you clean the squeegees.
4.
Squirt water on and around the squeegees.
Important:
Don’t get water in the front overflow or on the
build bed.
5.
Wipe the front and back of the squeegees clean. Use the
Pick to scrape away any excess powder.
6.
Thoroughly clean and dry the
•
Service Station
•
Deck
•
Build Bed
•
Front Overflow.
7.
Push the wiper lever back to its original position.
Wiper
Lever
Squeegees
Squeegees
Wiper
Lever
