4
zcentral.zcorp.com
Welcome To The ZPrinter
®
350/
ZPrinter
®
450 Quick Start Guide
This Guide is intended as a handy reference for users who are
familiar with their 3D printer and just need to print a part. The
Guide assumes that:
•
The ZPrinter is properly installed and running, and that no
errors are displayed on the ZPrinter control panel.
•
The ZPrint™ Software is installed and running, and is config-
ured properly for your printer and choice of powder. For
ZPrint installation instructions, see the
ZPrint™ Software
Manual
.
•
The printer is loaded with enough materials to complete the
build.
•
The printer is up to date on its routine maintenance.
•
The printer is connected to the same network as the com-
puter that is running ZPrint.
For more details, please refer to the
ZPrinter 350 Hardware
Manual
or the
ZPrinter 450 Hardware Manual
. The Manual is
included on the installation CD with your ZPrint software.
We encourage all customers to logon to our 3DP User Web site at
zcentral.zcorp.com
to learn more about 3D printing, materials,
Best Practices, and post-processing techniques.
1. Steps To Print
Follow the steps outlined in the sections below to print your part.
Section
Title
Page
2
Check The Printer
5
3
Setup Your Build And
Print
6
4
Gross Powder Removal
7
5
Fine Powder Removal
7
6
Routine Cleaning After
Every Build
8
7
Post-Processing With
Z-Bond
11
8
Replace a Print Head
12
Where To Go For More
Information
13
