YZ Systems NJEX LVO 610G Скачать руководство пользователя страница 32 | Manualshive

Страница: 32 / 44

YZ Systems NJEX LVO 610G Скачать руководство пользователя страница 32

YZ Systems Milton Roy • 201 Ivyland Road • Ivyland, Pennsylvania • USA • 18974 • P: 281.362.6500 • www.yzsystems.com

Page 27

NJEX 610G / 610F ver.11-2023

Section 7: Mechanical System

Flow Switch

The flow switch is installed in the discharge line of

the flow switch. When flow is pushed through the

switch, a magnetic contact will connect and send

a signal to the controller.

The flow switch will come set at the factory, but may

need to be adjusted for the installation site.

To adjust the flow switch, loosen the set screw (C)

and move the reed switch contact (B) up or down

and tighten the set screw.

On the home screen of the Z-100, press and hold

the toggle switch up to trigger a test pump to check

and repeat as necessary.

Please note during a new installation, the discharge

lines must be packed with odorant, and the line up

to back pressure before the flow switch will read.

The flow switch may need to be adjusted if the flow

conditions change, such as back pressure, at the

site of installation.

Figure 15

«
...
30
31
32
33
34
...
»

Содержание NJEX LVO 610G













































Отзывы:

Нет отзывов