DP-2010XHK Version 04142004 ATEX Rev.
YZ Systems, Inc. • 3101 Pollok Drive • Conroe, Texas • USA • 77303 • P: 936.788.5593 • F: 936.788.5720
3
Congratulations on your purchase of the DynaPak
2010 Series Sampler. You've made a wise
measurement investment for your company.
Before you begin installation, insure that all of the
necessary components are present. You will need
a sample cylinder(s) during the installation. If you
have questions concerning installation/operation,
contact your YZ representative or YZ Customer
Service at 936.788.5593. This sampler is designed
to be installed through a customer provided full
opening full ported 3/4" Root Valve on the pipeline.
A customer source of external gas supply with a
minimum pressure of 65 psig (4.5 Bar) must also
be available. The sampler can operate at pipeline
pressures from 20 psig (1.38 Bar) up to 1000 psig
(69 Bar).
1. Introduction
