background image

13

14

 

f

11.3 Checking:

You should check power adapter and cable, water tank, heated tubing and air filter regularly in case 

of any damage.
a. Check the power adapter and cable

•  Wipe the power adapter and cable with the dry compress if it is dirty.
•  Replace the power adapter and cable if it is broken.

b. Check the water tank

•  Replace the water tank if it is broken or cracked.
•  Replace the water tank if the seal is torn or cracked.

c. Check the heated tubing 

•  Replace the heated tubing if there are any holes, tears or cracks.

d. Check the air filter

• 

Please check the air filter every week and replace the air filter at least every four weeks.

• 

If you find some particle blocked in the air filter, replace it more often.

To replace the air filter

2

1

4

3

1. 

Open the air filter cover;

2. 

Remove the dirty air filter;

3. 

Place a new air filter onto the air filter cover;

4. 

Close the air filter cover. 

Caution: 

Make sure the air filter is fitted at all times to prevent water and dust from entering the device.

 

f

11.4 Reassembling:

After fished all the cleaning steps, reassemble all these parts together. When the water tank and 

heated tubing are dry, you can reassemble the parts. 

• 

Open the water tank and fill it with distilled room temperature water up to the maximum water 

level mark.

•  Close the water tank and insert it into the side of the device.
• 

Connect the heated tubing firmly to the air outlet located on the rear of the device.

• 

Connect the free end of the heated tubing firmly onto the assembled mask.

12. Therapy data

The device records your therapy data for you and your care provider so they can view and make 
changes to your therapy if required. 
The data is recorded in your therapy device and then transferred to your care provider via a USB 
Flash Disk.

USB Flash Disk

USB Connector

1. Open the cover at the left side of the device;
2. After the machine page is transferred to the home page, push the USB Flash Disk into the USB 

Connector;

3. Remove the USB Flash Disk from the device after it wrote success.

13. Traveling 

You can take your device with you wherever you go. Just keep the following in mind.

•  Use the travel bag provided to prevent damage to the device.
•  Empty the water tank and pack it separately in the travel bag.
•  Make sure you have the appropriate power cord for the region you are traveling to. For 

information on purchasing, contact your provider or Yuwell.

14. Trouble shooting

When your device has trouble, look for the following table to find solution. Contact your physician, 

your provider or Yuwell if you cannot solve your problem. Do not try to open the device.

Содержание YH-480A

















Отзывы: