Yuwell M102, Инструкция по эксплуатации, Страница: 6 / 18

06 07
iii. Using method of mesh nebulizer
1. Bottom up main unit of nebulizer, open battery cover and
mount battery.
2. Remove medication cup module from the nebulizer.
Press PUSH key behind the main unit downwards, push medication
cup towards main unit and remove medication cup module.
Upon removing medication cup module from nebulizer, push
medication cup module after confirming PUSH key is pressed
indeed, for fear of nebulizer damage.
Do not insert finger or other foreign matters from nozzle or
touch spray sheet, for fear of nebulizer damage.
Attention
2).Mount battery as
per polarity sign. 3).Close battery
cover.
Do not mix different types of batteries together.
When ow voltage indicator LED (orange) flicks, it means
battery level is about to run out; at this time, replace alkaline
battery as soon as possible.
When ow voltage indicator LED (orange) constantly on, it
means battery level is about to run out and nebulizer fails to
spray fog; at this time, replace alkaline battery immediately.
1). Open battery cover.
Attention
Take battery out if nebulizer is not used for a long time.
Close the battery cover immediately after replacing the
battery. Do not touch the battery cover during the atomization
process.
Patient can contact LED indicator and battery cover within 10
minutes. The maximum temperature on LED indicator and
battery cover is 46℃ based on maximum ambient 40℃ during
normal operation.
Attention