
9
Charging failure
1. High fascia gun temperature:
When the temperature of the fascia gun body is too high, it cannot be charged when it is
connected to the charger.
Solution:
Place the fascia gun in an environment below 40°C for 2h before charging.
2. High charger temperature:
When the fascia gun is charged in the environment above 40°C, the power adapter may
trigger overheating protection, thus causing normal charging failure of the fascia gun.
Solution:
Place the fascia gun in an environment below 40°C for 2h before charging.
Troubleshooting of Fascia Gun Operation
Fault description
Troubleshooting
1.The massage head slides out and falls
Check whether the massage head is
installed in place (see page 5 of the
instructions for specific operation)
2.The product cannot be started
Check whether the power is sufficient (if
the product has not been used for a long
time, please charge it for more than 8
hours)
3. The product cannot be charged
Check whether the charging connector
and power supply are plugged in place
4. The product stops suddenly
after 10min of continuous
operation
This phenomenon is normal as it is
caused by the setting for long-term
operation protection, which switches
from operation to standby mode. And
the product can be restarted through
short pressing (see page 4 of the
instructions for specific operation)
5. The product stops working
after the massage head
encounters the phenomenon
of locked rotor
This phenomenon is normal as it is
caused by the setting for abnormal
operation protection, which switches
from operation to standby mode. And the
product can be restarted through short
pressing (see page 4 of the instructions
for specific operation)
Содержание Gun Slim Elegant
