Revised 26/05/10
ALLURE ELECTRONIC Install Ops May2010
Page 13 of 23
REMOVING PARTS FOR SERVICE
(FIRST TURN OFF GAS AND POWER)
1)
Coals, Logs
-
Remove with care.
2)
Grate
- Lift up and out.
3)
Hearth
- Lift up and out.
4)
Front Tray
- Remove screw from centre hole and lift out.
5)
Rear Tray
- Remove screws from right and left side, lift out.
6)
Burners
- Lift out.
7)
Manifold Baffles
- Lift out. (left and right baffles)
SETTING THE FIRE
1) Replace all panels and grate.
2) Check for gas ignition, also check that the remote control operates flame
and fan boost before setting the fire.
3) Follow layout (see following pages) for setting of the fire.
4) Re-check gas ignition, remote control operation, etc as in #2 above.
5
6
5
7
4
Electronic Box
