Yukon CLM-150, Руководство пользователя, Страница: 8 / 11

7
Yukon ®
Fitness
Equipment
Rev. C CLM-150
Issued 12/08/2004
1. 5/16” x 1 3/4” Hex bolt
2. 5/16” Washer
3. Seat support
4. Seat pad
Pre-installed Parts:
A. Locking pin
B. 2” Open end cap
C. 1 3/16” x 2 3/8” End plug
Step 6.
• Slide seat support (5) over short tube portion
of the upright (8). Secure with three 5/16” x 3/4”
bolts (6) and three 5/16” washers (7).
• Fasten bottom of seat support (5) to the front
base (3) with two 3/8” x 4 1/4” bolts (1), four
3/8” washers (2), and two 3/8” nuts (4).
1. Foam roller
2. 1” Round tube
3. Foam roller post
Pre-installed Parts:
A. 1” Round plug
B. 1 3/4” x 1 3/4” End plug
1. 3/8” x 4 1/4” Hex bolt
2. 3/8” Washer
3. Front base
4. 3/8” Nylon nut
5. Seat support
6. 5/16” x 3/4” Hex bolt
7. 5/16” Washer
8. Upright
Step 5.
• Attach seat pad (4) to seat support (3) using two
5/16” x 1 3/4” bolts (1) and two 5/16” washers (2).
DO NOT over-tighten or you could crack the pad.
Step 7.
• Insert the round tube (2) through the foam roller
post (3) and push a foam roller (1) onto each end.
Assembly instructions (Contd)
A
4
1
2
3
C
B
1
2
2
4
3
5
6
7
8
6
6
A
1
2
3
1
A
B