Yukon CLM-150, Руководство пользователя, Страница: 5 / 11

4
Yukon ®
Fitness
Equipment
Rev. C CLM-150
Issued 12/08/2004
YUKON INTERNATIONAL, INC.
YUKON FITNESS EQUIPMENT
Assembly Instructions
Competitor Lat Machine
1. Front base
2. 3/8” x 4 1/4” Hex bolt
3. 3/8” Washer
4. Rear base
5. Rubber donut
6. Slide rod
7. 3/8” Nylon nut
8. Rear base extend
Pre-installed Parts:
A. Rectangular end cap
Step 1.
• Slide a rubber donut (5) onto the bottom of each
slide rod (6)
• Insert each slide rod (6) through the outer 1"
holes of the rear base (4).
NOTE:
Make sure the side hole of each rod is
at the bottom and facing toward the
holes of the rear base.
• Attach the rear base extend (8), rear base (4),
front base (1), and slide rods (6) together with
two 3/8” x 4 1/4” bolts (2), four 3/8” washers (3)
and two 3/8” nuts (7).
Side hole
at bottom
A
4
3
2
5
6
1
3
7
8
A
A