6
Yukon
®
Fitness
Equipment
Rev. C
CLM-150
Issued 12/08/2004
1. 3/8” x 4 1/4” Hex bolt
2. 3/8” Washer
3. Upright
4. 3/8” Nylon nut
5. Boom
6. 5/16” x 3/4” Hex bolt
7. 5/16” Washer
Pre-installed Parts:
A. 1 9/16” x 3 1/8” End plug
1. Top plate
2. 1/2” x 2” Pocket hex bolt
3. Allen wrench
4. Shaft selector
5. Slide rod
6. Weight plate
Step 3.
•
Carefully
slide all the weight plates (6) down the
slide rods (5).
Note:
The slot of each weight plate should face
toward the back of the machine.
• Attach top plate (1) to first hole of shaft selector (4)
with the 1/2” x 2” pocket hex bolt (2).
• Slide top plate (1) down slide rods (5).
Step 4.
• Fit back end of the boom (5) over the two slide
rods (8) and secure with two 5/16” x 3/4” bolts (6)
and two 5/16” washers (7).
• Secure the upright (3) to boom (5) with two 3/8”
x 4 1/4” bolts (1), four 3/8” washers (2), and two
3/8” nuts (4).
Assembly instructions (Contd)
6
5
4
3
2
1
Slot of plate
1
2
2
4
3
5
6
7
8
A
A