Yudo ACT-D800, Инструкция по эксплуатации

Страница: 10 / 15

c. In case injection signal is off before delay time passed, it resets to set time.
如在延迟时间或
OPEN
时间结束之前
,
注塑信号就开始设定时间初始化。
d. In case injection signal is off before open time passed, it resets to set time.
OPEN
时间终止前注塑信号终止时往设定时间初始化
.
e. When injection signal is off, delay set time and open set time will be displayed
DEL display panel and OPEN display panel respectively.
注塑信号结束
,
延迟设定时间和
OPEN
设定时间
,
就标示在
DEL
显示窗口和
OPEN
显示窗口。
7
3
）
Other Menu
其它显示动态及功能
A: Output Voltage Indicator
标出输出电压
a. Select output voltage DC24V or AC220V in compliance with Solenoid valve.
输出电压是根据螺旋管针阀可选
DC24V
或者
AC220V
。
b. Display output voltage in DC24V LED or AC220V LED.
输出电压是根据螺旋管针阀可选
DC24V
或者
AC220V
。
B: Input ON/OFF Indicator
输入
ON/OFF
标示
a. When input is on, SIGNAL LED is on.
输入
ON/OFF
标示
b. When input is off, SIGNAL LED is off.
输入
OFF-SIGNAL LED
关闭。
９、
Mode Specification
◆
Mode A
Selecting mode A: After the injection signal has
been received, the gate is continuously closed
during the DEL Time(
t1
),After the DEL time has
elapsed, the gate Opens and will remain opened
until the end of the injection signal.
选择模式
A:
接收到注塑信号后
,
在延迟时间内
,
浇口是关
闭的
,
在
(DEL
时间
)
消失后
,
浇口打开且一直保持开着状态
,
直到注塑时间信号结束。
T t 1
3 sec 10sec
Signal ON Signal OFF
t1: Delay Time
Gate Open