33
Note:
The program will be held if it jump from a control segment to another control segment (an
Hold action will be
inserted between two control sections), external run/Hold operation is needed to release the Hold
status. It is not
allowed that the jump section jump to itself (for example: t -6= -6), otherwise, the Hold status cannot
be released.
Program arrangement of multi-curve operation
AI-516P
has the advanced function of flexible program arrangement. Normally, when the program
stops, the StEP will
be automatically set to1. Thus if StEP is not change to other value, a program will start from step1.
If multiple curves
are defined, the control can jump to different curve by setting step 1 as jump segment.
For example:
There are three curves with the length of 3 steps represent three groups of process
parameter, they are
separately arranged on StEP2-StEP4, StEP5-StEP7, StEP8-StEP10. Settings are as follows:
t- 1=-2.0 Execute the program of curve 1 (StEP2-StEP4)
t- 1=-5.0 Execute the program of curve 2 (StEP5-StEP7)
t- 1=-8.0 Execute the program of curve 3 (StEP8-StEP10)
Note:
Can choose the curves by setting the value of StEP
“
t-1
“
set to -2.0, -5.0 or -8.0 before the
program startup.
