YTL 23316, Инструкции и сборка, Страница: 12 / 24

- 12 -
WARNING
Before operating or using the log splitter, review the instructions below and all safety information.
Failure to follow these instructions may result in property damage or injury to the operator or
bystanders.
WARNING
ALWAYS use the log splitter for its intended use.
ONLY use the log splitter to split wood logs, length wise with the grain.
NEVER modify, alter or change the log splitter in anyway, modifications will void the warranty.
NEVER attach a rope, cable or other device to the control lever on the log splitter.
ONLY operate the log splitter in daylight.
NEVER leave the log splitter unattended while the engine is running.
ENSURE the log splitter engine is off. Never move the log splitter with its engine running.
ALWAYS TURN THE FUEL VALVE TO THE OFF POSITION to prevent carburetor flooding and
reduce the chance of fuel leakage.
ALWAYS RAISE THE SUPPORT LEG UP before moving or towing the log splitter.
DO NOT move the log splitter up or down hills by hand – use a towing vehicle.
ONLY use approved vehicles for towing.
DO NOT exceeds the maximum towing speed of 45 MPH.
NEVER operate log splitter while it is attached to the vehicle.
NEVER operate or let anyone else operate, the log splitter while under the influence of alcohol, drugs,
or medication.
USING YOUR LOG SPLITTER
1. DO NOT at any time carry passengers, sit or stand on the log splitter.
2. Check the hydraulic oil level and visually inspect all hoses and attachments for problems.
3. Inspect the engine and make sure the engine oil level is correct and there is a full tank of fuel.
4. Extend the wedge slide, lubricate the surface with grease. This helps prevent wear between the
wedge slide and beam.
Operation Instructions